| 塑料检查井的井座部分大多采用的是一次性注塑成型 |
| 添加时间：2018/3/28 14:14:18 浏览次数： |
| 塑料检查井的井座部分大多采用的是一次性注塑成型，以异径接头、变角接头和橡胶密封圈等配件来达到改变管径及角度的连接。塑料检查井配套开发了井盖、井筒和相关配件，路面载荷通过井盖、井座作用于检查井周围，避免了路面载荷对检查井的破坏。井座具有上下浮动的功能，可主动适应路面的高低变化，同时井筒采用专用井筒，可根据现场埋设深度截取相应长度，灵活方便。井筒、进（出）水管道与井座的连接采用橡胶密封圈柔性承插式连接或者是热收缩套连接，可适应小范围内的角度变化，施工方便快捷，密封性能好、防渗漏，有效防止对地下水的二次污染，是一种环保节能建材。 Most of the wells of plastic inspection wells are disposable injection molding, and fittings such as reducer, variable angle joint and rubber seal ring are used to change the connection between diameter and angle. The plastic inspection well has developed well covers, wellbore and related accessories, and the pavement load has been operated around the inspection well through the well cover and well seat, avoiding the damage of the pavement load to the inspection well. The well seat has the function of floating up and down, and it can adapt to the change of the road surface actively. At the same time, the shaft adopts special shaft, and it can intercept the corresponding length according to the depth of the site, which is flexible and convenient. Well, (a) pipe connection road and well base with rubber sealing ring flexible socket type connection or heat shrinkable sleeve connection, can adapt to changes in a small range of angle, convenient construction, good sealing performance, anti leakage, effectively prevent the two pollution of groundwater, is a kind of environmental protection and energy saving building materials. |
| 上一页 塑料检查井的井座部分是一种环保节能建材 |
| 下一页 什么是检查井？ |
Copyright © 技术支持：遨游网络