保定市检查井厂

（1）、部件采用热塑性塑料一次注塑而成，耐腐蚀、耐酸碱、使用寿命长。 通过国家化学建筑材料测试中心测试，经久耐用；（2）、保护环境 各个管口连接处均采用柔性连接，连接灵活方便，有优越的水密性，彻底杜绝雨污水渗漏、泄漏，防止对地下水的二次污染。安全环保；（3）、管道与井座柔性连接，管道与井座的粘土共同运动、均匀沉降，很好的解决了传统检查井与塑料管道连接所产生的不均匀沉降问题，有效防止地面塌陷；（4）、安装简便，采用分体组装结构、施工方便、提高工作效率、可全天候施工，砖砌检查井和其他水泥模块砌筑井与之无法相比。井筒可现场切割、调整，适应各种安装深度要求，有效降低成本，大大提高施工进度，缩短工期是传统检查井的10-20倍以上；（5）、高效排水 内壁光滑流畅，设有导流槽，污物不易滞留，减少了堵塞的可能，有着出色的排水性能，雨污排放率是传统检查井的1～3倍；（6）、重量轻，易于运输和安装，性能可靠，承载能力强；适配性强 ，品种齐全，可任意调节井筒高度及在筒体上打孔，调节方向，满足工程安装的一切需求。

(1), part of the thermoplastic plastic injection molding, corrosion resistance, acid and alkali, long service life. Through the national chemical building materials testing center testing, durable; (2) protect the environment, all the connections are connected with flexible joint and flexible and convenient, has excellent water tightness, completely prevent rain water leakage, leakage, prevent the two pollution of groundwater. Safety and environmental protection; (3), flexible pipe is connected with the well seat, clay movement, pipeline and well base settlement, a good solution to the traditional inspection wells and plastic pipe connection caused by uneven settlement problem, effectively prevent the ground subsidence; (4), easy to install, use split assembly structure and the construction is convenient, improve work efficiency, all-weather construction, brick and other cement masonry inspection wells wells and the module can not be compared. The shaft of the scene cut, adjust, adapt to various installation depth requirements, reduce the cost, improve the construction schedule, shorten the construction period is 10-20 times higher than the traditional inspection wells; (5) and efficient drainage smooth inner wall, a diversion groove, dirt can not be stranded, reducing the blockage may have good drainage performance the rain, sewage discharge rate is 1~3 times than traditional inspection wells; (6), light weight, easy transportation and installation, reliable performance, strong bearing capacity; strong adaptability, variety complete, adjustable height and shaft holes on the cylinder to adjust the direction, meet all the needs of Engineering installation.